WARNING: Do NOT CLOSE/ABORT the program when writing the new firmware. Doing so WILL DAMAGE/CORRUPT your Seagull device.

Before starting:
Please extract the contents of this file in the root of your harddrive. (ex. drive C:)


When performing the update, please follow these instructions:

1. Disconnect all devices from #MAP-X2.

2. Connect your Seagull device to the USB port of your PC.

3. Start the "Seagull_Update.exe" program.

4. Choose COM PORT corresponding to #MAP-X2 and click "Initialize"

5. Follow the instructions within the program until update is completed.